Skip to content

标准笔形电感探头

AX/S - 弹簧驱动型
  • ±0.25, ±0.5 , ±1, ±1.5 , ±2.5, ±5 & ±10 毫米
  • 测量范围
  • 精度 最高可达 1 微米
  • 高达 0.05 微米 测量重复性
    测力 0.7N ( 其他测力大小可选)
  • IP65 防护等级
  • 弹簧驱动

对于大多数的测量和位置控制应用而言, 接触式测量探头通常是唯一的高性价比的可靠的测量方案

对于传统的笔形传感器而言, 通常使用内置的弹簧来驱动其移动部件。当其安装在测量机构上时,
需要设计移动机构带着传感器对被测量零件进行检测。

AX/P - 气动驱动型
  • 1, ±2.5, ±5 & ±10 毫米 测量范围
  • 精度 最高可达 1 微米
  • 高达 0.05 微米 测量重复性
  • 测力 0.7N ( 其他测力大小可选)
  • IP65 防护等级
  • 气动气囊驱动
  • 真空缩回驱动类型可选

气动驱动类型的探头(无论时气动驱动型 还是 真空缩回型) 就能直接使用,不需要移动机构带动。节 省机构成本的同时,还提高了系统的重复性。因为传感器的初始位置为缩回,因此其能满足自动化 设备的快速装载需求。 AX/5/1 更是能移动多达10 毫米的距离而仅仅使用其伸出尽头处 ±1 毫米的校 准行程,大大避免了结构误操作对传感器造成的损坏。

AJ/P - 喷射型气动驱动型
  • ±1, ±2.5, ±5 & ±10 毫米 测量范围
  • 技术规格跟标准气动驱动类型相同
  • 气动驱动由内置活塞执行 – 气囊只起到防尘防水作用
  • IP50 防护等级

传统的气动驱动类型的传感器,其驱动气源充满在防尘气囊内部。喷射型气动驱动类型的探头气不 再充气,仅仅起防尘防水的作用。因此即使气囊破损也不影响使用,从而减少设备停机时间,节省 雇主的设备维护成本。

LVDT Gauge Probe | Compatible Specifications

• Range of LVDT and Half Bridge gauge probes compatible with industry standard specifications
• Excitation Frequency options from 2.5 kHz to 20 kHz  
• Excitation Voltage from 2 to 5 V rms  
• Gauge Probe sensitivity from 73mV/V/mm to 230 mV/V/mm

Solartron Metrology can provide contact gauging probes in LVDT and half bridge configurations that are fully compatible with common industrial standards. As gauging probes evolved a number of excitation frequency, amplitude and sensitivity combinations have become 'standards' these are commonly know by the name of the original probe manufacturer as shown in the table below.

Compatible Specifications

Solartron can supply fully compatible gauge probes in either LVDT or half bridge configuration for all of the industry standards above but also many other configurations. Please contact our Sales Office for additional information.

For more information about Solartron Metrology inductive sensors and what is LVDT - see LVDT Half Bridge and Digital Transducer Theory